European Projects, EU HORIZON 2020

EU HORIZON 2020 - MANUELA - Additive Manufacturing using Metal Pilot Line

Date: 01/10/2018 - 30/09/2022

Coordinator:
Chalmers Tekniska Hoegskola AB 

Consortium:
20 partners from 8 nations

Volume:
15 422 720 €


Project:
Metal additive manufacturing (AM) allows, by enabling use of advanced design, production of high added value components, at levels that cannot be reached with conventional manufacturing technique.
Still, the AM-based manufacturing sequence implies large amounts of critical steps – design for AM, AM fabrication, post processing, etc. – compared to conventional production sequences. Presently, the key competencies related to these steps are either not fully implemented at industrial level (process quality monitoring) or dispersed geographically with poor connection between different steps.
Relying on two major AM technologies (LPBF: Laser Powder Bed Fusion and EBM Electron Beam Melting), MANUELA aims at deploying an open-access pilot line facility, covering the whole production sequence, to show full potential of metal AM for industrial AM production.
At first, careful instrumentation and adaptation of LPBF & EBM machines will allow increased process reliability and speed. Secondly, the pilot line – including the adapted processes – will be deployed. The hardware layer will integrate novel process quality control monitoring and automated post-AM handling and processing. The line will be fed by design/optimization and AM process simulation workshops. Those workshops will collect continuous feedback from the physical parts of the pilot lines, to increase process reliability and robustness.
MANUELA relies on a consortium composed of industrial end user’s, suppliers, (material/powder, AM hardware, quality monitoring system, software, automation and post-AM treatment) as well as top research institutes in powder-bed metal-AM, covering full range of AM technology chain for pilot line deployment.
The deployed pilot line will be validated for use cases, covering wide span of applications including automotive, aerospace, energy and medical. To insure sustainability of the deployed line and its open access at project end, a dedicated exploitation plan will be established.

 

CORDIS Website 

EU HORIZON 2020 - MANUELA - Additive Manufacturing using Metal Pilot Line

Postal address ECPE e.V.:
ECPE European Center for Power Electronics e.V.
Ostendstrasse 181
D-90482 Nuremberg, Germany
Phone: +49 (0)911 81 02 88-0

Subscribe to the ECPE News

 

© 2018 ECPE European Center for Power Electronics e.V.