Workshop

ONLINE | ECPE Online Workshop: Hardware in the Loop (HIL) Testing of Power Electronics: Concepts, Updates and Trends

Date: 15/03/2021

Location: Digital Event, Germany

Technical Chair:

Prof. Marc Hiller, Karlsruhe Institute of Technology (DE)
Dr. Giovanni De Carne, Karlsruhe Institute of Technology (DE)
Timo Rösch, OPAL-RT Germany (DE)


ECPE Contact:
Ingrid Bollens
+49 911 81 02 88 - 10
ingrid.bollens(at)ecpe.org

Members Area

All proceedings since 2004, studies, reports and more... ECPE Network Members are welcome to register!

Login not necessary for event online-registration!

ONLINE | ECPE Online Workshop: Hardware in the Loop (HIL) Testing of Power Electronics: Concepts, Updates and Trends

Registration Deadline: 10 March 2021


In order to reduce design iterations and time-to-production, components for embedded systems, such as the power electronics which drive an electric motor in an electric vehicle for example, have to be tested in as realistic conditions as possible before being qualified in a real environment. Hardware-in-the-loop (HIL) testing provides thorough and repeatable testing conditions by simulating not just the environment of operation but also system-wide inputs and disturbances. By this, not only the functionality of the device under test may be validated, but also the behaviour to simulated misfunctions of connected components. At the same time sensors in the system can measure changes in the tested component for reliability and end-of-life predictions.
This workshop aims to address the different HIL-techniques relevant to power electronics. In addition to presenting state-of-the-art examples of HIL, future trends like the impact of the introduction of very high frequency Wide Bandgap Devices on real-time simulation in the loop will be discussed.
In bringing experts in various HIL technologies within the ECPE network together with academics and end-users who would like to get insight into the latest developments in this field, it is expected that both newcomers to HIL technologies as well as experienced practitioners who want to get an overview of this challenging field will benefit from the presentations and discussions covered in this workshop.

Workshop

ONLINE | ECPE Online Workshop: Hardware in the Loop (HIL) Testing of Power Electronics: Concepts, Updates and Trends

Date: 15/03/2021

Location: Digital Event, Germany

Technical Chair:

Prof. Marc Hiller, Karlsruhe Institute of Technology (DE)
Dr. Giovanni De Carne, Karlsruhe Institute of Technology (DE)
Timo Rösch, OPAL-RT Germany (DE)


ECPE Contact:
Ingrid Bollens
+49 911 81 02 88 - 10
ingrid.bollens(at)ecpe.org

Online-Registration

Pflichtfeld-Satz

The fields marked with an asterisk (*) are mandatory and must be completed.

Participant
Address Participant
Invoice Address (if different)
Invoice Details
Participation fee

Participation fee for industry:
- ECPE Member Companies: 3 seats free of charge

Participation fee for university/institutes:
- 10 % discount for ECPE Competence Centres

Participation fee for students/PhD students:
- please send a copy of your student ID/students seats are limited

Register before 10 March 2021

  • The participation fee includes lectures and digital proceedings (provided 1 day prior to the event by email).
  • With the confirmation of registration by email you are registered for the tutorial and the invoice will be sent by post.
  • Participation by web conference tool (Webex). Access data will be provided by email.
  • Cancellation policy: Full amount will be refunded in case of cancellation up to 1 week prior to the event. After this date and in case of no-show 50 % of the fee is non-refundable (substitutes are accepted anytime).
  • Due to the General Data Protection Regulation, we kindly point out that we have to store your personal data in our CRM system in order to process your registration. The ECPE Privacy Policy can be found at www.ecpe.org/privacy-policy
Comments
Submit

Postal address ECPE e.V.:
ECPE European Center for Power Electronics e.V.
Landgrabenstrasse 94
D-90443 Nuremberg, Germany
Phone: +49 (0)911 81 02 88-0

Subscribe to the ECPE News

 

© 2018 ECPE European Center for Power Electronics e.V.