Tutorial

Thermal Engineering of Power Electronic Systems Part 1: Thermal Design and Verification | ECPE/Cluster Tutorial

Date: 02/07/2024 - 03/07/2024

Location: Erlangen, Germany

Technical Chair:

Prof. Uwe Scheuermann, Friedrich-Alexander-Universität Erlangen-Nürnberg
Nils Jahn, TU Dortmund University
Prof. Martin Pfost, TU Dortmund University
Simon Quergfelder, Fraunhofer IISB
Andreas Simon-Kajda, Alexander Voth, Samuel Pauls, Siemens Industry Software
Dr. Arendt Wintrich, Semikron Danfoss


ECPE Contact:
Ingrid Bollens
+49 911 81 02 88 - 10
ingrid.bollens@ecpe.org


Registration Deadline: 27 June 2024

Members Area

All proceedings since 2004, studies, reports and more... ECPE Network Members are welcome to register!

Login not necessary for event online-registration!

Thermal Engineering of Power  Electronic Systems Part 1: Thermal Design and Verification | ECPE/Cluster Tutorial

Thermal engineering of power electronic systems is a key to achieve high performance and reliability. With a clear focus on power modules the tutorial addresses the thermal design and validation of power electronic components exemplified by a 100 kW IGBT converter equipped with additional thermal sensors. The attendees should have basic knowledge on power semiconductor devices and power electronics systems. Part 1: After a review of the basic theory of heat transfer, the calculation of losses in a voltage source inverter will be explained. For selected stationary operating conditions, the expected device temperatures of the sample converter will be calculated from datasheet values. Application of online tools to facilitate this process will be demonstrated. Participants can chose between FEM simulations and equivalent thermal network calculation with LTspice™ to simulate these operating conditions. The results are compared to thermal measurements using thermocouples and an IR camera. Furthermore, a 3rd practical training group will deal with the comparison of a simulated power board with measurement and calibrate afterwards the simulation model.

All presentations and discussions will be in English language.

 

Go to
Thermal Engineering of Power Electronic Systems Part 2: Thermal Management and Reliability

Tutorial

Thermal Engineering of Power Electronic Systems Part 1: Thermal Design and Verification | ECPE/Cluster Tutorial

Date: 02/07/2024 - 03/07/2024

Location: Erlangen, Germany

Technical Chair:

Prof. Uwe Scheuermann, Friedrich-Alexander-Universität Erlangen-Nürnberg
Nils Jahn, TU Dortmund University
Prof. Martin Pfost, TU Dortmund University
Simon Quergfelder, Fraunhofer IISB
Andreas Simon-Kajda, Alexander Voth, Samuel Pauls, Siemens Industry Software
Dr. Arendt Wintrich, Semikron Danfoss


ECPE Contact:
Ingrid Bollens
+49 911 81 02 88 - 10
ingrid.bollens@ecpe.org


Registration Deadline: 27 June 2024

Registration

Pflichtfeld-Satz

The fields marked with an asterisk (*) are mandatory and must be completed.

Participant
Address Participant
Invoice Address (if different)
Invoice Details
Participation

Industry: ECPE Member Companies: 25 % discount for each participant

University/institutes: 10 % discount for ECPE Competence Centres

Students/PhD students: Please send a copy of your student ID/students seats are limited

www.ecpe.org/members 

Register before 27 June 2024

  • The regular participation fee includes dinner, lunches, coffee/soft drinks. The reduced (PhD) students fee includes all the above except for dinner (can be booked for an extra fee of € 50*)
  • The presentations will be provided by email via a download link short before the event. A printed version of the tutorial handout is available on request (€ 50,-*).
  • With the confirmation of registration by email you are registered for the tutorial and the invoice will be sent by email.
  • Payment by credit card not possible.
  • Cancellation policy: Full amount will be refunded in case of cancellation up to 2 weeks prior to the event. After this date 50 % of the fee is non-refundable (substitutes are accepted anytime).
  • Photo material will be created at the event. Potentially a picture of the participants can be taken and used for editorial reporting.
  • By participating in one of our events, you confirm that you are aware of and comply with the hygiene concept.
  • If the event cannot take place because of force majeure or for good cause, a change to an online format or a cancellation is possible. The delegates shall be informed immediately. In this case, the participant is able to cancel free of charge. No claims beyond this shall be entertained.
  • Due to the General Data Protection Regulation, we kindly point out that we have to store your personal data in our CRM system in order to process your registration. The ECPE Privacy Policy can be found at www.ecpe.org/privacy-policy
Please make your choice
Submit

Postal address ECPE e.V.:
ECPE European Center for Power Electronics e.V.
Ostendstrasse 181
D-90482 Nuremberg, Germany
Phone: +49 (0)911 81 02 88-0

Subscribe to the ECPE News

 

© 2018 ECPE European Center for Power Electronics e.V.