Tutorial

ECPE Tutorial: Testing Automotive Power Modules according to the ECPE Guideline AQG 324

Date: 07/10/2020 - 08/10/2020

Location: Nuremberg, Germany

Technical Chair:

Peter Dietrich, Richardson RFPD Germany
Steffen Ewald, Fuji Electric Europe
Dr. Gabor Farkas, Mentor Graphics
Frank Heidemann, Mathias Gebhardt, SET
Dr. Martin Rittner, Robert Bosch
Stefan Schmitt, Semikron Elektronik
Prof. Dr. Markus Thoben, Fachhochschule Dortmund


ECPE Contact:
Ingrid Bollens
+49 911 81 02 88 - 10
ingrid.bollens(at)ecpe.org

Members Area

All proceedings since 2004, studies, reports and more... ECPE Network Members are welcome to register!

Login not necessary for event online-registration!

ECPE Tutorial: Testing Automotive Power Modules according to the ECPE Guideline AQG 324

Registration Deadline: 30 September 2020


The ECPE Guideline AQG 324 is prepared and released by the ECPE Working Group ´Automotive Power Module Qualification´ comprising ECPE member companies from the automotive supply chain. The original version is based on the supply specification LV 324 which has been developed by German automotive OEMs together with representatives from the power electronics supplier industry.

The described tests concern the module design as well as the qualification of devices on module level (i.e. the assembly) but not the qualification of semiconductor chips or manufacturing processes. The requirements, test conditions and tests presented in the tutorial essentially refer to power modules based on Si power semiconductors while wide bandgap power semicon­ductors (e.g. SiC or GaN) are addressed but not yet fully covered by the Guideline.

The Tutorial with speakers from the AQG 324 Core Team will give practical information and advice how to test power modules according to the AQG 324 Guideline under comparable conditions. It aims at direct users from beginners to senior experts coming from power module suppliers, automotive tier 1 suppliers or test service and equipment providers.

All presentations and discussions will be in English language.

General information

Tutorial

ECPE Tutorial: Testing Automotive Power Modules according to the ECPE Guideline AQG 324

Date: 07/10/2020 - 08/10/2020

Location: Nuremberg, Germany

Technical Chair:

Peter Dietrich, Richardson RFPD Germany
Steffen Ewald, Fuji Electric Europe
Dr. Gabor Farkas, Mentor Graphics
Frank Heidemann, Mathias Gebhardt, SET
Dr. Martin Rittner, Robert Bosch
Stefan Schmitt, Semikron Elektronik
Prof. Dr. Markus Thoben, Fachhochschule Dortmund


ECPE Contact:
Ingrid Bollens
+49 911 81 02 88 - 10
ingrid.bollens(at)ecpe.org

Postal address ECPE e.V.:
ECPE European Center for Power Electronics e.V.
Landgrabenstrasse 94
D-90443 Nuremberg, Germany
Phone: +49 (0)911 81 02 88-0

Subscribe to the ECPE News

 

© 2018 ECPE European Center for Power Electronics e.V.